Office of Steam Logo_1

« previous next »
Pages: [1]

Author Topic: Working Mamod Grindstone powered by Jensen 20G  (Read 1365 times)

  • Administrator
  • Engineer
  • *****
  • Posts: 6276
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Working Mamod Grindstone powered by Jensen 20G
« on: February 10, 2021, 08:22:35 pm »
Working Mamod Grindstone powered by Jensen 20G and DIY transmission -

Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Sr. Member
  • ****
  • Posts: 1818
  • Location: The Winter Wonderland, Michigan.
Re: Working Mamod Grindstone powered by Jensen 20G
« Reply #1 on: February 10, 2021, 09:20:23 pm »
I hope you have your safety glasses on Jim, that's a lot of sparks.
You loose an eye and your chances of finding the Vegamite gets cut in half, you know that don't you.
Logged
Tommy

"Steam it, like you mean it."

  • Administrator
  • Engineer
  • *****
  • Posts: 6276
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Working Mamod Grindstone powered by Jensen 20G
« Reply #2 on: February 10, 2021, 09:23:21 pm »
Quote from: Woe is me on February 10, 2021, 09:20:23 pm
I hope you have your safety glasses on Jim, that's a lot of sparks.
You loose an eye and your chances of finding the Vegamite gets cut in half, you know that don't you.

You know...silly me I actually didn't have any on (and I'm usually really good about that) I was a little concerned for the camera lens, but my attention should have been more on the safety of my eyes Tommy as you pointed out. Its always a good reminder.
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Administrator
  • Engineer
  • *****
  • Posts: 9191
  • Location: Minnesota, USA 🇺🇸
Re: Working Mamod Grindstone powered by Jensen 20G
« Reply #3 on: February 10, 2021, 11:18:27 pm »
Great spark show Jim!!  8)   The Demon was the first one I remember doing this.

I like your decal too  8)
Logged
Nick

  • Full Member
  • ***
  • Posts: 457
    • WeedenSteam
Re: Working Mamod Grindstone powered by Jensen 20G
« Reply #4 on: February 10, 2021, 11:38:59 pm »
You are having way too much fun Jim.
Logged
Frank C.
http://weedensteam.com
       - engine identification and parts

  • Administrator
  • Engineer
  • *****
  • Posts: 6276
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Working Mamod Grindstone powered by Jensen 20G
« Reply #5 on: February 11, 2021, 04:52:54 pm »
Quote from: Nick on February 10, 2021, 11:18:27 pm
Great spark show Jim!!  8)  The Demon was the first one I remember doing this.

I like your decal too  8)

Thanks Nick, I asked Geoff how the best way to hold the flint in place the first time I tried it.
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Administrator
  • Engineer
  • *****
  • Posts: 6276
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Working Mamod Grindstone powered by Jensen 20G
« Reply #6 on: February 11, 2021, 04:53:21 pm »
Quote from: Weedensteam on February 10, 2021, 11:38:59 pm
You are having way too much fun Jim.

Thanks Frank  ;D
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Administrator
  • Engineer
  • *****
  • Posts: 9191
  • Location: Minnesota, USA 🇺🇸
Re: Working Mamod Grindstone powered by Jensen 20G
« Reply #7 on: February 11, 2021, 05:04:36 pm »
Quote from: Jim on February 11, 2021, 04:52:54 pm
Quote from: Nick on February 10, 2021, 11:18:27 pm
Great spark show Jim!!  8)  The Demon was the first one I remember doing this.

I like your decal too  8)

Thanks Nick, I asked Geoff how the best way to hold the flint in place the first time I tried it.

I took the simple route and screwed one of these onto a cotton swab stick after breaking the end of the swab off

[ Guests cannot view attachments ]
Logged
Nick

  • Administrator
  • Engineer
  • *****
  • Posts: 6276
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Working Mamod Grindstone powered by Jensen 20G
« Reply #8 on: February 11, 2021, 05:20:54 pm »
They're impressive looking flints Nick.
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Global Moderator
  • Engineer
  • *****
  • Posts: 5596
  • Location: St. Paul Indiana
Re: Working Mamod Grindstone powered by Jensen 20G
« Reply #9 on: February 11, 2021, 09:20:23 pm »
That was fun to watch Jim. 😁
Logged
Bruce, St. Paul Indiana, USA
"Originality thrives in seclusion free of outside influences beating upon us to cripple the creative mind."
  Nikola Tesla

  • Administrator
  • Engineer
  • *****
  • Posts: 6276
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Working Mamod Grindstone powered by Jensen 20G
« Reply #10 on: February 11, 2021, 10:15:07 pm »
Thanks Bruce :)
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

Pages: [1]
« previous next »