Office of Steam Logo_1

« previous next »
Pages: [1]

Author Topic: Little Schoenner “Vulkan” Arrival  (Read 953 times)

  • Administrator
  • Engineer
  • *****
  • Posts: 9192
  • Location: Minnesota, USA 🇺🇸
Little Schoenner “Vulkan” Arrival
« on: December 20, 2021, 06:46:42 pm »
In very good shape for 120 years old, but I’m confused by the model number??

The engine matches the dimensions highlighted in yellow, but is the model number 112/13 1/2 or is it a 112/21? I assume it’s the 112/21, are the numbers in the lower table wrong?

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]
Logged
Nick

  • Jr. Member
  • **
  • Posts: 72
  • Location: Rio de Janeiro
Re: Little Schoenner “Vulkan” Arrival
« Reply #1 on: December 21, 2021, 08:02:54 am »
Hi Nick,

It is a copy / paste error, in the lower table it schould say 21 to 24 as in the price table.
Your beautiful Schoener is a 112/21, congrats with your purchase.


Maurice.
Logged

  • Administrator
  • Engineer
  • *****
  • Posts: 9192
  • Location: Minnesota, USA 🇺🇸
Re: Little Schoenner “Vulkan” Arrival
« Reply #2 on: December 21, 2021, 08:06:31 am »
Quote from: mauricedelaat on December 21, 2021, 08:02:54 am
Hi Nick,

It is a copy / paste error, in the lower table it schould say 21 to 24 as in the price table.
Your beautiful Schoener is a 112/21, congrats with your purchase.


Maurice.

Thank You! I assumed it was just an error in the table.

I have a “Zenith” that I will have to dig back out and get a good picture of the pair together…


[ Guests cannot view attachments ]

[ Guests cannot view attachments ]
Logged
Nick

  • Full Member
  • ***
  • Posts: 597
Re: Little Schoenner “Vulkan” Arrival
« Reply #3 on: December 21, 2021, 08:10:43 am »
Don't know the model numbers but they're both great.
Logged

  • Jr. Member
  • **
  • Posts: 72
  • Location: Rio de Janeiro
Re: Little Schoenner “Vulkan” Arrival
« Reply #4 on: December 21, 2021, 08:26:23 am »
Hi Nick,

In case you don't have it, hope this helps to indentify the Zenith.

[ Guests cannot view attachments ]


Regards,


Maurice.
Logged

  • Administrator
  • Engineer
  • *****
  • Posts: 9192
  • Location: Minnesota, USA 🇺🇸
Re: Little Schoenner “Vulkan” Arrival
« Reply #5 on: December 21, 2021, 08:34:57 am »
Quote from: parallelmotion on December 21, 2021, 08:10:43 am
Don't know the model numbers but they're both great.

I clicked the BIN as fast as I could on the Vulkan  ;)

https://www.ebay.com/itm/185206829398

The Zenith came from bigal’s collection


Quote from: mauricedelaat on December 21, 2021, 08:26:23 am
Hi Nick,

In case you don't have it, hope this helps to indentify the Zenith.


Regards,


Maurice.

Thanks again Maurice! I will have to dig it out and get measurements, but from memory it is likely the smallest one.
Logged
Nick

  • Sr. Member
  • ****
  • Posts: 1199
Re: Little Schoenner “Vulkan” Arrival
« Reply #6 on: December 21, 2021, 09:30:01 am »
Cute little engine - pretty decent shape given its age.

So, how long was the listing up there and HOW did I miss
it?  You must have a secret search routine!

Congrats,
Wayne
Logged

  • Administrator
  • Engineer
  • *****
  • Posts: 9192
  • Location: Minnesota, USA 🇺🇸
Re: Little Schoenner “Vulkan” Arrival
« Reply #7 on: December 21, 2021, 10:32:25 am »
Quote from: komet163b on December 21, 2021, 09:30:01 am
Cute little engine - pretty decent shape given its age.

So, how long was the listing up there and HOW did I miss
it?  You must have a secret search routine!

Congrats,
Wayne

Haha, looks like it was up for 27 minutes with only 6 views
Logged
Nick

  • Sr. Member
  • ****
  • Posts: 1199
Re: Little Schoenner “Vulkan” Arrival
« Reply #8 on: December 21, 2021, 10:56:43 am »
Well, I've done a couple 'BINs as fast as I can' purchases
so I've been lucky on occasion, too.  I've been looking
for an old German engine w/tiled base but they just seem
to slip through my fingers.  I'm 'jelly' as my son says.

Put up a running video!

Congratulations,
Wayne
Logged

  • Administrator
  • Engineer
  • *****
  • Posts: 9192
  • Location: Minnesota, USA 🇺🇸
Re: Little Schoenner “Vulkan” Arrival
« Reply #9 on: December 21, 2021, 11:04:18 am »
Quote from: komet163b on December 21, 2021, 10:56:43 am
Well, I've done a couple 'BINs as fast as I can' purchases
so I've been lucky on occasion, too.  I've been looking
for an old German engine w/tiled base but they just seem
to slip through my fingers.  I'm 'jelly' as my son says.

Put up a running video!

Congratulations,
Wayne

Thanks again Wayne and will do! If I can get both of the Schoenners in easy running condition I’d like to get a video of the pair running together. 8)
Logged
Nick

  • Administrator
  • Engineer
  • *****
  • Posts: 9192
  • Location: Minnesota, USA 🇺🇸
Re: Little Schoenner “Vulkan” Arrival
« Reply #10 on: December 21, 2021, 11:09:55 am »
Forgot to mention, I had to search through the “snow” to find a small nail that worked itself out of the base in shipping  :D

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]
Logged
Nick

  • Sr. Member
  • ****
  • Posts: 1088
  • that's all I have to say about that
  • Location: Switzerland - Lake of Constance
    • Emco Unimat
Re: Little Schoenner “Vulkan” Arrival
« Reply #11 on: December 21, 2021, 12:53:36 pm »
Good catch at a very low price - Congrats Arnold
 ;D
Logged

  • Full Member
  • ***
  • Posts: 522
Re: Little Schoenner “Vulkan” Arrival
« Reply #12 on: December 27, 2021, 06:42:08 pm »
    I saw this one and looked at it several times, was not sure what it was, but the price was right. I thought that it was newer, 1920s-30s, now wish I had bought it!
Logged
Pages: [1]
« previous next »