Office of Steam Logo_1

« previous next »
Pages: [1]

Author Topic: DC steam engine?  (Read 924 times)

  • Jr. Member
  • **
  • Posts: 22
DC steam engine?
« on: April 22, 2021, 07:08:08 pm »
Hi
Hoping the experts on this site can help me. I’m looking at buying a vintage steam engine, and need some information on it. It’s old, and has a logo on it with a capital letter D intertwined with a capital letter C and it says “made in Germany”.
Any ideas, folks?
Logged

  • Full Member
  • ***
  • Posts: 597
Re: DC steam engine?
« Reply #1 on: April 22, 2021, 07:15:27 pm »
The make is Doll & Co. They made hundreds of models over a long period of time so it's impossible to tell you more without photos, etc.
Logged

  • Administrator
  • Engineer
  • *****
  • Posts: 9193
  • Location: Minnesota, USA 🇺🇸
Re: DC steam engine?
« Reply #2 on: April 22, 2021, 07:16:15 pm »
Logged
Nick

  • Jr. Member
  • **
  • Posts: 22
Re: DC steam engine?
« Reply #3 on: April 22, 2021, 07:19:47 pm »
Awesome! Thanks for the info! Looks like it’s a DC 343. Are they worth much?
Logged

  • Administrator
  • Engineer
  • *****
  • Posts: 9193
  • Location: Minnesota, USA 🇺🇸
Re: DC steam engine?
« Reply #4 on: April 22, 2021, 07:28:27 pm »
Quote from: Diverguy64 on April 22, 2021, 07:19:47 pm
Awesome! Thanks for the info! Looks like it’s a DC 343. Are they worth much?

About $100 +/- depending on paint
Logged
Nick

  • Jr. Member
  • **
  • Posts: 22
Re: DC steam engine?
« Reply #5 on: April 22, 2021, 07:58:54 pm »
Good to know!
Thanks!
Logged

  • Jr. Member
  • **
  • Posts: 22
Re: DC steam engine?
« Reply #6 on: April 23, 2021, 12:57:09 pm »
Looks rather old.
Logged

  • Full Member
  • ***
  • Posts: 740
  • Location: Lennestadt, Siuerland, Germany
Re: DC steam engine?
« Reply #7 on: April 23, 2021, 03:12:44 pm »
Your Doll steam engine is not a 343/1 with an oscillating cylinder, but probably a 348/2 with a fixed cylinder. In any case, it is a machine from the 348 series. You can find out the exact model by comparing the dimensions of the base plate, the boiler length and diameter, the flywheel diameter and the cylinder shell diameter with the information on Ventix Pages. The existing fittings also help with identification. I am very sure that your machine is a 348/2, but I do not know the exact dimensions.
Logged
Cheers
Jürgen
Dealing with steam is one way of having fun in life.

  • Jr. Member
  • **
  • Posts: 22
Re: DC steam engine?
« Reply #8 on: April 23, 2021, 04:53:57 pm »
Thanks for this! I will have to measure it when I get it.
Logged
Pages: [1]
« previous next »