Office of Steam Logo_1

Author Topic: EP Cosmos  (Read 1146 times)

  • Jr. Member
  • **
  • Posts: 204
  • Location: Belgium, Niel bij as
    • Stoomwereld / Steam World / Dampfwerld
EP Cosmos
« on: July 18, 2019, 04:21:41 pm »
Today my latest Ernst Plank Cosmos arrived.
I was in pritty good condition, except the screw thread of the whistle into the boiler was gone.
So I made a bush with new screw thread, and drilled out the old hole to fit in the new insert.



When the new insert was soldered in it was chemically blued to blend in.

And repaired it was, time to test…


Some photos will follow…
Danny
"Das lied schläft in der Maschine"
(the song sleeps in the machine) lyrics Einsturzende Neubauten song "Nnnaaamm"  http://stoomwereld.webnode.be

  • Global Moderator
  • Engineer
  • *****
  • Posts: 5156
  • Wherever you go ......... there you are!
  • Location: Eastern Sierra
Re: EP Cosmos
« Reply #1 on: July 18, 2019, 04:39:52 pm »
Nice work there Danny ....   and nice engine too!!!
"Information is not knowledge, Knowledge is not wisdom, Wisdom is not truth, Truth is not beauty, Beauty is not love, Love is not music: Music is THE BEST...   
Wisdom is the domain of the Wis (which is extinct). Beauty is a French phonetic corruption of a short cloth neck ornament currently in resurgence..."
F. Zappa ... by way of Mary, the girl from the bus.

  • Administrator
  • Engineer
  • *****
  • Posts: 6277
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: EP Cosmos
« Reply #2 on: July 18, 2019, 05:58:52 pm »
A very lovely old engine Danny.
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos


  • Administrator
  • Engineer
  • *****
  • Posts: 9192
  • Location: Minnesota, USA 🇺🇸
Re: EP Cosmos
« Reply #3 on: July 18, 2019, 08:40:38 pm »
Nice work Danny!

By the way, was there any relation between EP and Schoenner? I have always used that style of firebox venting to ID Schoenners... but obviously this is an EP...
Nick

  • Administrator
  • Full Member
  • *****
  • Posts: 540
  • Location: Houston, Texas
Re: EP Cosmos
« Reply #4 on: July 18, 2019, 08:44:12 pm »
Nice repair, nice engine.  Clean, too.
Scott

  • Jr. Member
  • **
  • Posts: 204
  • Location: Belgium, Niel bij as
    • Stoomwereld / Steam World / Dampfwerld
Re: EP Cosmos
« Reply #5 on: July 19, 2019, 01:53:26 am »
Nice work Danny!

By the way, was there any relation between EP and Schoenner? I have always used that style of firebox venting to ID Schoenners... but obviously this is an EP...

Not direct, Schoenner was taken over by Falk in 1912.
But it's common knowledge that there was a lot of interaction between the Nurnberg firms, in exchange of parts and copying each other.
How far these interactions went is not really known.
But in a few cases the men behind the firms where also related in some way to each other.
Not strange if you know that they all where members of the Jewish community.
And marriages almost always  stayed between members of this community.
It's well known that Carette for instance was a cousin of the Bing's.
And if you read the memoirs of Ignaz Bing (published in German), he describes how he helped Carette to start up his own firm.
But it was not always a love story between them, in a later stage in the memoirs of Ignaz Bing, you see friction appear between them.
And not for professional reasons, although not publicly, but for political reasons, as nationalism grew in Germany towards WW1.
Towards WW1 the Jewish community was as pro Nationalistic a the rest of Germany, and the Fatherland alwijs came into first place.
Even production for the war effort, going from nationalistic commemorative plates to steel helmets, was common practice…

A few photos of the engine…





Cheers,
Danny
Danny
"Das lied schläft in der Maschine"
(the song sleeps in the machine) lyrics Einsturzende Neubauten song "Nnnaaamm"  http://stoomwereld.webnode.be

  • Administrator
  • Engineer
  • *****
  • Posts: 9192
  • Location: Minnesota, USA 🇺🇸
Re: EP Cosmos
« Reply #6 on: July 19, 2019, 09:33:56 pm »
Thank you for that history Danny, you are a wealth of knowledge!

There is so much to love about this engine, the cast/octagonal base, heavy flywheel, conical boiler top, I could keep going!  8)
Nick

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4122
  • Location: Plano, Texas
Re: EP Cosmos
« Reply #7 on: July 20, 2019, 04:12:28 pm »
Nice job Danny.

These EP Cosmos are wonderful.

One of the favorites in my collection.

Thanks for posting the video and pictures.

  • Global Moderator
  • Engineer
  • *****
  • Posts: 5596
  • Location: St. Paul Indiana
Re: EP Cosmos
« Reply #8 on: July 20, 2019, 06:18:53 pm »
Nice repair Danny & a very nice Vertical...she glides over effortlessly to a pleasant click over & then on to near full power running, nice, Very NICE !
Bruce, St. Paul Indiana, USA
"Originality thrives in seclusion free of outside influences beating upon us to cripple the creative mind."
  Nikola Tesla