Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

I found two of these gauges and standoff's in my P.O.Box today. What a surprise. Well all of other
projects for the day were put on the back burner. The top hole was drilled and tapped for Wilesco's
standard whistle, 5mm. The whistle I was using, with the pull chain, is 6mm. I had been using the
adapter but it's nickel and that silver blob looked bad. also made it taller. So I drilled out the
top and tapped it to 6mm. Walla!  Maybe I should of tried to find out where they came from before I
did that, oh well.



  [ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ]

An attractive and functional addition Tom.

You know it Bruce, you know it.

Hey, I think Bruce made a brass thingy Very similar to this!.... But I think he's retiring now...or maybe jest tired

Hey, I think Bruce made a brass thingy Very similar to this!.... But I think he's retiring now...or maybe jest tired

Yes , I made these for Tommy (an old friend) and No , I'm not retiring...or even tired. 😊😉👍

Very nice and very professional mod there Tommy.

Quote from: Jim on April 30, 2021, 05:52:24 pm

Very nice and very professional mod there Tommy.

Thanks Jim, but the professional's from Indiana. I'm just the applicator.

A professional applicator... (or is that something in the feminine care aisle 😆 )

A professional applicator... (or is that something in the feminine care aisle 😆 )
[/quote]


There better not be any strings attached.
[/quote]
now that's funny