The nickel plater finished the sight glass lugs, screws & protector plate Friday so I was able to finish off the Jensen #45 candlestick engine project.
here is the finished engine. I will be boxing it up & sending it back to the original owner since 1958 , to Iowa on Monday morning.
I mistakenly stated that it has a 300W heater, it has a 600W heater now.
Please.forgive the slight "un"trueness of the flywheel , despite carefully rotating it around the axle for the least wobble , this how it came from Jensen Mfg. In 1958.
Home
Search
Today's Posts
Login
Register