Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

Been a while since we have seen you around

Back wheels are held on with a circle type C clip made from soft wire.
That sits in the groove in the axle
Safety Valve main thread is 1BA and spring retainer nut is 8BA
Chimney height is tube 62 mm
Flare has width of 27 mm
Depth of 5 mm
Chimney is made from flat tin which is rolled and spot welded to fit over the chimney cup on boiler
Flare is separate and soldered on about 2 - 3 mm down
 I can make all parts if you have any problems

Cheers
Dennis

[ Guests cannot view attachments ]