Office of Steam Logo_1

Author Topic: DIY Sand Blaster  (Read 935 times)

  • Administrator
  • Engineer
  • *****
  • Posts: 6407
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: DIY Sand Blaster
« on: April 10, 2019, 06:18:34 pm »
Thanks for the video.  I've seen something like this done before, and they seem to work pretty well.  What air pressure did you run?

120psi just make sure your outside as you don't want to be breathing sand in (just the same precautions that go along with everything else we do in our workshops).
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos