Office of Steam Logo_1

« previous next »
Pages: [1]

Author Topic: My Covid Project  (Read 484 times)

  • Sr. Member
  • ****
  • Posts: 1016
  • Location: Ontario, Canada
My Covid Project
« on: January 21, 2021, 11:39:39 am »
I've been pretty busy around the house during this pandemic, but I have found a bit of time here and there since last September to work on this:

[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]

This is the first engine I have built from castings, and along the way I have committed every conceivable blunder in machining; however, I persevered, fixed things, made three crankshafts, and finally tried to run it a couple of days ago:



Et voila! Ca marche!

Now I can clean it up, lose the bright green gaskets (too flashy), and paint it all nice and purty....
Logged
Bob

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4122
  • Location: Plano, Texas
Re: My Covid Project
« Reply #1 on: January 21, 2021, 11:49:57 am »
Well done!

A great COVID Project.
Logged

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2529
  • Location: Jutland
    • www.SteamUp.dk
Re: My Covid Project
« Reply #2 on: January 21, 2021, 02:09:26 pm »
Well done !!!

Are you going to paint, ad cylinder cladding, reversing linkage and so forth...or is this first test considered finished now that it runs?
Logged
Cheers
Jan
WEBSITE: SteamUp YOUTUBE: SteamUp

  • Sr. Member
  • ****
  • Posts: 1016
  • Location: Ontario, Canada
Re: My Covid Project
« Reply #3 on: January 21, 2021, 02:42:30 pm »
Quote from: classixs on January 21, 2021, 02:09:26 pm
Well done !!!

Are you going to paint, ad cylinder cladding, reversing linkage and so forth...or is this first test considered finished now that it runs?

Thanks for the encouraging comments, all.

Yes, Jan, I intend to paint it. I'll also try to add mahogany or teak cylinder cladding, but no reverse (just don't want that).
Logged
Bob

  • Sr. Member
  • ****
  • Posts: 1202
Re: My Covid Project
« Reply #4 on: January 22, 2021, 12:50:42 pm »
Nice project that runs well.  When it comes after
a struggle it is all the sweeter.  I like that
look-thru valve chest cover.  So, what's next?

Keep on steamin',
Wayne
Logged

  • Sr. Member
  • ****
  • Posts: 1016
  • Location: Ontario, Canada
Re: My Covid Project
« Reply #5 on: January 24, 2021, 08:15:10 am »
Taking a rest from the 10V just now, Wayne, and will return to it at a later date to paint, etc.

Next project is underway; I'm giving my calliope a valve job.
Logged
Bob

  • Full Member
  • ***
  • Posts: 727
  • Steam passionate and collector
  • Location: Saint-Mandé (France)
    • MYCP
Re: My Covid Project
« Reply #6 on: January 24, 2021, 10:51:58 am »
Bonjour Bob,
For fun, if you would like to avoid dead points, here is a solution for a 10V :   ;)
Logged
Raphaël, Membre du Modèle Yacht Club de Paris : http://mycparis.fr/
Membre de l'Offshore Club de Paris: http://site-ocparis.wifeo.com/
Youtube : https://www.youtube.com/rhavrane

  • Sr. Member
  • ****
  • Posts: 1016
  • Location: Ontario, Canada
Re: My Covid Project
« Reply #7 on: January 24, 2021, 11:06:53 am »
Bonjour, Raphael.

Ah, bon. Tres intelligent.

Merci.

Bob
Logged
Bob
Pages: [1]
« previous next »