Office of Steam Logo_1

« previous next »
Pages: [1]

Author Topic: Mini Pipe Benders  (Read 1161 times)

  • Administrator
  • Engineer
  • *****
  • Posts: 6264
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Mini Pipe Benders
« on: December 06, 2024, 09:13:40 pm »
I have the spring benders and also the blue set of mini pipe benders below -


[ Guests cannot view attachments ]

But does anyone have and use this type?

[ Guests cannot view attachments ]
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Sr. Member
  • ****
  • Posts: 1817
  • Location: The Winter Wonderland, Michigan.
Re: Mini Pipe Benders
« Reply #1 on: December 07, 2024, 02:15:07 pm »


But does anyone have and use this type?

[ Guests cannot view attachments ]
[/quote]


I have them in two sizes. Used them for bending brass fuel line on RC stuff.
They work OK but they're not foolproof, can still kink. Best to anneal the
brass first.
Logged
Tommy

"Steam it, like you mean it."

  • Administrator
  • Engineer
  • *****
  • Posts: 6264
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Mini Pipe Benders
« Reply #2 on: December 07, 2024, 05:24:19 pm »
Unfortunately there is no pic?
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Sr. Member
  • ****
  • Posts: 1817
  • Location: The Winter Wonderland, Michigan.
Re: Mini Pipe Benders
« Reply #3 on: December 08, 2024, 07:27:18 am »
Quote from: Jim on December 07, 2024, 05:24:19 pm
Unfortunately there is no pic?



I didn't add a picture. That was your picture that got lost in the quote.
Here are the ones I use.

[ Guests cannot view attachments ] [ Guests cannot view attachments ]
Logged
Tommy

"Steam it, like you mean it."

  • Newbie
  • *
  • Posts: 2
Re: Mini Pipe Benders
« Reply #4 on: January 01, 2025, 11:41:26 am »
Im very interested in the pipe benders shown,the ones with the red tips on the handles. Can you supply a link where I can get one? Im looking for a reliable way to bend copper tubing that is fairly small in OD.
This is my first post on this forum, I hope it's OK to ask on posting an outside URL.
Logged

  • Administrator
  • Engineer
  • *****
  • Posts: 9189
  • Location: Minnesota, USA 🇺🇸
Re: Mini Pipe Benders
« Reply #5 on: January 01, 2025, 11:54:43 am »
Logged
Nick
Pages: [1]
« previous next »