Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

Hi Charlie,

Spent some time on the boiler, all the threads were bad so I replaced the double plates on the insude of the boiler.
I managed to get rid of some dents and re-soldered the boiler end plate and box.
The original paint was all gone, so I decided to apply a new paint as close as possible to the original, previous shared pictures helped a lot.
I am now looking for the right tools to do the red paint striping (before applying varnish)..... which will be a challange.
I have ordered chemicals to do a new buing on the boiler.
The safety valve has been rebuild with the sliding weight.

regards,

Maurice.