Office of Steam Logo_1

« previous next »
Pages: [1]

Author Topic: Model Engineers (ME) Thread Table  (Read 2735 times)

  • Administrator
  • Engineer
  • *****
  • Posts: 6262
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Model Engineers (ME) Thread Table
« on: March 09, 2019, 07:25:16 pm »
Model Engineers (ME) Thread Table, great for the wall of your workshop I refer to mine constantly.

Edit: Sandy found an error in this ME table so I have removed this one.
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Administrator
  • Engineer
  • *****
  • Posts: 6262
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Model Engineers (ME) Thread Table
« Reply #1 on: March 09, 2019, 07:29:14 pm »
[ Guests cannot view attachments ]
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Administrator
  • Engineer
  • *****
  • Posts: 6262
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Model Engineers (ME) Thread Table
« Reply #2 on: March 09, 2019, 07:29:32 pm »
[ Guests cannot view attachments ]
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Jr. Member
  • **
  • Posts: 183
  • Location: Pretzel City PA
Re: Model Engineers (ME) Thread Table
« Reply #3 on: March 09, 2019, 07:53:56 pm »
Ive watched Keith Appleton so many times.....
Logged
I think I have OCD??

  • Administrator
  • Engineer
  • *****
  • Posts: 6262
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Model Engineers (ME) Thread Table
« Reply #4 on: March 09, 2019, 08:40:37 pm »
Quote from: Gearhead Jed on March 09, 2019, 07:53:56 pm
Ive watched Keith Appleton so many times.....
Me too....incredible model steam engineer.
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Jr. Member
  • **
  • Posts: 183
  • Location: Pretzel City PA
Re: Model Engineers (ME) Thread Table
« Reply #5 on: March 10, 2019, 12:10:24 am »
 So much great info from him.
Logged
I think I have OCD??

  • Administrator
  • Engineer
  • *****
  • Posts: 6262
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Model Engineers (ME) Thread Table
« Reply #6 on: March 10, 2019, 12:11:58 am »
Quote from: Gearhead Jed on March 10, 2019, 12:10:24 am
So much great info from him.
Jed, how would you like to spend a week with him in his workshop. How great would that be!
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Jr. Member
  • **
  • Posts: 183
  • Location: Pretzel City PA
Re: Model Engineers (ME) Thread Table
« Reply #7 on: March 10, 2019, 03:42:14 am »
I'd have way too much fun!
Logged
I think I have OCD??

  • Jr. Member
  • **
  • Posts: 87
Re: Model Engineers (ME) Thread Table
« Reply #8 on: March 10, 2019, 04:41:48 am »
What i use might still be able to find
[ Guests cannot view attachments ] [ Guests cannot view attachments ]
Logged

  • Jr. Member
  • **
  • Posts: 54
  • Location: West Coast of Scotland
Re: Model Engineers (ME) Thread Table
« Reply #9 on: March 10, 2019, 07:39:15 am »
Quote from: Jim on March 09, 2019, 07:25:16 pm
Model Engineers (ME) Thread Table, great for the wall of your workshop I refer to mine constantly.

(Attachment Link)

Hi Jim,

I would not recommend the first table you posted for ME threads... it has some glaring errors for tapping drill sizes for 7/32", 1/4" and 9/32" diameter threads.

One would not expect the tapping drill size for a 32tpi thread to be a larger drill than that required for a 40tpi thread.

The second and third tables posted are correct.

I thought I would bring your attention to it just in case someone copies the first one.

Keep Happy.

Best regards.

Logged
SandyC      West Coast of Scotland.
“Don’t think about your errors or failures; otherwise, you’ll never do a thing.” Bill Murray.

  • Administrator
  • Engineer
  • *****
  • Posts: 6262
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Model Engineers (ME) Thread Table
« Reply #10 on: March 10, 2019, 05:23:18 pm »
Thanks Sandy, I have deleted that first table.
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

Pages: [1]
« previous next »