Author Topic: Wilesco 409 and Other T Engines (Read 249 times)

Rob1962 · « **on:** February 24, 2025, 08:50:23 am »

Is there a way of Traction Engines to do 360s
I have the Chain with springs on a few of my engines,I’m Almost tempted to use rubber bands.

Woe is me · « **Reply #1 on:** March 06, 2025, 10:13:00 am »

Not sure what you mean but you can only turn left or right so far and then
the front wheels hit the boiler.

Rob1962 · « **Reply #2 on:** July 05, 2025, 03:49:06 am »

No, what I mean is when I adjust the steering wheel to do 360s, the wheel keeps changing positions, so that makes it impossible to do 360s.

RedRyder · « **Reply #3 on:** July 05, 2025, 07:45:40 am »

I never tried this however it should work.

You can rig the steering axle in position using mechanics wire (thin wire).

If for Wilesco with steering, I would still rig the front axle to override the loose chains on the factory steering.

Glad to see you are still having fun!

Gil

Rob1962 · « **Reply #4 on:** July 05, 2025, 06:08:21 pm »

Hello Gil, Yes loads of fun just received my Roundhouse Billy Loco with RC what a blast.

Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

News:

Author Topic: Wilesco 409 and Other T Engines (Read 249 times)

Rob1962

Wilesco 409 and Other T Engines

Woe is me

Re: Wilesco 409 and Other T Engines

Rob1962

Re: Wilesco 409 and Other T Engines

RedRyder

Re: Wilesco 409 and Other T Engines

Rob1962

Re: Wilesco 409 and Other T Engines