Office of Steam Logo_1

Author Topic: 90 degree V-twin engine  (Read 50 times)


  • Jr. Member
  • **
  • Posts: 75
90 degree V-twin engine
« on: March 09, 2019, 11:39:14 am »
This is my V-twin engine. I designed it with a 90 degree cylinder separation angle with the idea that it would be smoother. I used the open pushrods and rocker arms to give it a neater appearance. The crankshaft rides on sealed ball bearings and it has a pressure oil system to feed the rods and cams. It has an S&S dual fire ignition triggered by a Hall sensor.
Talent unshared is talent wasted.


September EOTM Winner:

Trevorís "Bassett-Lowke Steam Generating Plant c1934"