Hello folks
I haven't made a large plant for a while, so it's time.
this plant features (2) Jensen 25's powering a Jensen #15 generator/transmission which in turn is powering yet another lower ratio transmission, the other Jensen #25 is powering a windmill. every engine, generator & transmission & windmill have roller ball bearings in the axles for heavy duty trouble-free long-term use. I have installed a custom brass pressure gauge mount & 0-30 psi pressure gauge. the boiler (2.5"od) has a brass sleeve cartridge inserted 700W heater (easily replaceable) she weighs 11.5 lbs.; the solid plinth is 18" x 16" & is 18" tall @ the tip of the windmill. it has a heavy duty 3/16 awg (grounded) 8' power cord. 2 Brass tags identify this plant & the maker. I have many hours in this project & I take great care in making it run as good as possible & strive for attention to detail.