This is my lates project of converting a Jensen #35 into a German overtype style steam engine. this started life as a very little used in the box Jensen #35 now with a custom firebox (double walled internally, a custom cast iron yoke supporting the front of the boiler via (2) fillister 6/32nd nickel screws into two brass enclosed pockets soldered into the boiler. it now sports a 600+ Watt immersion style heater in the boiler & this all sits on a 1" thick x 5 1/4" x 9" oak plinth. has a custom ID badge. the safety valve is custom made to fit inside the chimney & is 7/8" tall with a 0 ring groove cut in near the top to create a leak proof chimney.