Someone asked, so this is how I did it.
Now, I usually forget about pix until I'm already
done and everything is buttoned up. That is the
case here. So, I made a bit of a diagram, showing
a 2 cart and 1 cart installation from one end. It's
really simple, but very important to have the metal
next to the carts to help them 'get rid' of their heat.
Several 1/16" thick strips the same length of the cart
will do it - Thats how mine 2 Empires are set up. I
also later experimented with wrapping heavy baling
wire tightly around the cart and that worked - I had
the cart heating (uninstalled) a long time w/no problems.
To finish, if you are handy and experienced at fussing
around and cobbling things up you'll find it's easy.
Otherwise, just take your time - try not to electrocute
yourself and remember, no matter how these engines
are heated, they always get hot.
Good Luck,
Wayne
Home
Search
Today's Posts
Login
Register