Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

Yes I do like it too!


Gil

From Gil's advice
I listened to your suggestion and made the following changes.
1, the fuel tank we can reduce the original height. I can not like the picture of the vertical fuel tank. Because it can not be installed in the whole. Consider installing on the wooden box. The original design is very suitable for packaging and transportation.
2, the intake valve has been modified vertically. The spark plug moves to the side.
3, the ignition trigger is modified on the horizontal axis. This suggestion is very good. It can not use the useless secondary ignition. It can save energy by looking good. The ignition trigger part on the crankshaft is replaced with a small pulley.
4,The exhaust pipe has been modified.
5. Next, I want to use a metal piston ring. I am still studying.
Jin
[ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ]