Alors, pour la bougie, c'est environs l'épaisseur d'un ongle soit 0,4 a 0,5mm
Pour le pointeau oui env 1/4 de tour d'ouverture, a régler pendant le fonctionnement.
le carburant, jutilire l'essence synthétique Aspen, sa va super bien c'est pour les débroussailleuses tondeuses etc.
J'ai reçu ce moteur cet été, il a démarré a la main au quart de tour au premier essais.
J'ai l'intension de l'améliorer comme mon M90, paliers en bronze, graisseurs, support du réservoir, échappement et base en bois avec Led indiacteur.
Tu maitrise l'Anglais, voudrais tu traduire tout sa et mettre la dessous pour les membres du forum ?
D'avance Merci. Amicalement Christian.
So, for the candle, it is around the thickness of a nail or 0.4 to 0.5mm
For the needle yes approx 1/4 of an opening turn, to be adjusted during operation.
the fuel, I use Aspen synthetic gasoline, its going great it's for brushcutters mowers etc.
I received this engine this summer, it started by hand on the first test.
I intend to improve it like my M90, bronze bearings, grease nipples, tank support, exhaust and wooden base with LED indicator.
You master English, would you like to translate all of this and put it below for the members of the forum?
Thanks in advance. Sincerely Christian.
Christian, I have to confess that I regularly use Google traduction
And the needle valve you made for my m91 is very helpful because the original one is too small in diameter to my opinion.