Bonjour Jim,
Tour engine seems to run perfectly, did you enhance it ?
On mine, after a few moments of use, the crankshaft had taken some play and especially the flywheels no longer held on the crankshaft, so we improved this engine by replacing its worn needle bearings with shouldered bronze rings and made small flats on the crankshaft so that the flywheel retaining screws can be housed there.
In addition, we raised the gas tank by 15mm to help the carburetor work.
Besides this, I have successfully tested Alkylate 2-stroke gasoline:
G'day Raphael.....this engine is 'as is' from when I bought it 4 years ago. I was happy it started so easily after not running it for quite a while.
Your one is running very well.
Home
Search
Today's Posts
Login
Register