I removed this engine from the still sealed box and the pin for the rocker arm fulcrum was missing.
I borrowed a pin from one of mine for a test run to assess my progress after I finished much of the work.
Then I got to thinking, it likely would not have left china with the pin missing but may have been shipped without the snap ring to hold the pin in place as did one of mine and that is the pin I used.
Jin, if you are reading this could you please include a couple snap rings in my next shipment.
Then I located the original box and removed the foam packaging and whaddayaknow... there it sat.
Gil
[ Guests cannot view attachments ]
Home
Search
Today's Posts
Login
Register