Office of Steam Logo_1

Author Topic: EBay Bargain 1/8 Scale Rider-Ericsson Now a Shelf Queen!  (Read 198 times)

crazydoug

  • Full Member
  • ***
  • Posts: 806
EBay Bargain 1/8 Scale Rider-Ericsson Now a Shelf Queen!
« on: March 19, 2019, 08:50:42 pm »
[ Guests cannot view attachments ] After several days and many hours and many questions and answers from other forum members, I still do not have this engine running.  I have a two inch version that I was able to get running with some work, but I also had another two inch version that I never could get running, which I moved on.  I have decided that I have other projects with a higher priority, so at least for now, this cute little pumping engine will have to be a shelf queen! 

If I ever run out of other projects, I may get back to this, as I would really like to know what is keeping it from working properly.  But, for now, I admit defeat! 


St Paul Steam

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4861
  • Location: St. Paul Indiana
sorry to hear that you cant get it running (yet) Doug, I had this model (sold on to Mike ,Maxwell) @ cabin fever 2 years ago, when I 1st got mine it wasn't a strong runner....but would run, when I saw you initial post I wanted to answer for you what the problem might be ,but for the life of me I cant remember what I did to mine to make it a strong runner, best I can recall it was a lot of small things...& I remember working with the top of the hoop quite a bit, I had a bix burner which I think really helped. I remember I had to totally disassemble the water pump & clean it because the check ball was stuck in the bottom port. & mine would be very difficult to get running when you had water in the jacket on initial start up....I would get it running & then introduce the cooling water after it warmed up in a few minutes, these take quite a bit off heat as I recall.  as I'm writing all this, things are coming back to me. I know I worked on mine over 2 weekends.
hope this helps in the future.
SPS, Bruce
Bruce, St. Paul Indiana, USA
"Originality thrives in seclusion free of outside influences beating upon us to cripple the creative mind."
  Nikola Tesla

crazydoug

  • Full Member
  • ***
  • Posts: 806
I WILL get back to it someday! Right now i am starting another hit/miss engine build, and want to see how far i can get with it before NAMES.
Doug