Office of Steam Logo_1

« previous next »
Pages: 1 [2]

Author Topic: Nitrile Rubber as Drive bands  (Read 2082 times)

  • Full Member
  • ***
  • Posts: 458
    • WeedenSteam
Re: Nitrile Rubber as Drive bands
« Reply #15 on: March 24, 2021, 01:10:30 pm »
From what I understand much of the green stock is actually made to slip for applications where jam-ups can occur such as conveyers, etc.

Logged
Frank C.
http://weedensteam.com
       - engine identification and parts

  • Administrator
  • Engineer
  • *****
  • Posts: 5071
  • Location: Connecticut - USA
Re: Nitrile Rubber as Drive bands
« Reply #16 on: March 24, 2021, 01:43:31 pm »
Quote from: classixs on March 24, 2021, 03:49:57 am
Great news Jim :)

Use the Loctite brand of glue as well, since i am "raised" using their o-ring kits at work.
It has never failed me there, so never had any reason to stray.
My glue here is Loctite 406. Since that´s what comes with the kits, i´ve always bought that to be safe.
But 406 it is more or less a standard cyanoacrylate glue, so assume other types (and brands for that matter) will do the job equally well.

Thanks for the tip, Jan! 
I just ordered some 406 for my rubber drive bands.
Gil
Logged

  • Administrator
  • Engineer
  • *****
  • Posts: 9194
  • Location: Minnesota, USA 🇺🇸
Re: Nitrile Rubber as Drive bands
« Reply #17 on: March 24, 2021, 06:05:15 pm »
Quote from: Weedensteam on March 24, 2021, 01:10:30 pm
From what I understand much of the green stock is actually made to slip for applications where jam-ups can occur such as conveyers, etc.

Yes, they advertise it as that as well. If you look close it is textured.
Logged
Nick

  • Administrator
  • Engineer
  • *****
  • Posts: 9194
  • Location: Minnesota, USA 🇺🇸
Re: Nitrile Rubber as Drive bands
« Reply #18 on: March 24, 2021, 06:06:25 pm »
I’ve never seen the 2 part super glue, will have to look for it as I had troubles using plain super glue on black rubber belting and gave up on it.
Logged
Nick

  • Administrator
  • Engineer
  • *****
  • Posts: 6287
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Nitrile Rubber as Drive bands
« Reply #19 on: March 24, 2021, 06:11:42 pm »
Really happy with the black look of the O ring and its very limp material and very strong and that glue joins it superbly.

The latest batches of the green belting from China was the most vivid flouro green.
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

Pages: 1 [2]
« previous next »