Office of Steam Logo_1

Author Topic: Price range for a good used Jensen #20?  (Read 865 times)

  • Full Member
  • ***
  • Posts: 855
Price range for a good used Jensen #20?
« on: April 21, 2021, 07:14:59 pm »
I have not been looking for very long but have not seen a used Jensen #20 come up for sale yet, what might I expect to pay for a nice used one?

  • Administrator
  • Engineer
  • *****
  • Posts: 9193
  • Location: Minnesota, USA 🇺🇸
Re: Price range for a good used Jensen #20?
« Reply #1 on: April 21, 2021, 07:37:37 pm »
$350 minimum would be a good, cheap price, but expect to pay a little more (likely pushing $500)... especially if one has not been on ebay for awhile...

This is the only recent ebay sale that I can find and it’s in the UK

https://www.ebay.com/itm/274654954461?hash=item3ff2b603dd%3Ag%3AIJgAAOSwsxJgCXFK&nma=true&si=dkiZniuy6QAzRjS%252Fd2FjtAGoVls%253D&orig_cvip=true&nordt=true&rt=nc&_trksid=p2047675.l2557
Nick

  • Global Moderator
  • Engineer
  • *****
  • Posts: 5596
  • Location: St. Paul Indiana
Re: Price range for a good used Jensen #20?
« Reply #2 on: April 21, 2021, 07:38:33 pm »
Imho $400-600, & for a 20G $500-$650 assuming it has the cast genny. both in reasonably good working condition.
Bruce, St. Paul Indiana, USA
"Originality thrives in seclusion free of outside influences beating upon us to cripple the creative mind."
  Nikola Tesla

  • Administrator
  • Engineer
  • *****
  • Posts: 9193
  • Location: Minnesota, USA 🇺🇸
Re: Price range for a good used Jensen #20?
« Reply #3 on: April 21, 2021, 07:57:53 pm »
Imho $400-600, & for a 20G $500-$650 assuming it has the cast genny. both in reasonably good working condition.

Thinking more on the subject, I don’t think I’d let one go for less than $500
Nick

  • Administrator
  • Engineer
  • *****
  • Posts: 6287
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Price range for a good used Jensen #20?
« Reply #4 on: April 21, 2021, 08:07:04 pm »
$350 minimum would be a good, cheap price, but expect to pay a little more (likely pushing $500)... especially if one has not been on ebay for awhile...

This is the only recent ebay sale that I can find and it’s in the UK

https://www.ebay.com/itm/274654954461?hash=item3ff2b603dd%3Ag%3AIJgAAOSwsxJgCXFK&nma=true&si=dkiZniuy6QAzRjS%252Fd2FjtAGoVls%253D&orig_cvip=true&nordt=true&rt=nc&_trksid=p2047675.l2557

Someone got a bargain there.
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos


  • Administrator
  • Engineer
  • *****
  • Posts: 9193
  • Location: Minnesota, USA 🇺🇸
Re: Price range for a good used Jensen #20?
« Reply #5 on: April 21, 2021, 08:16:17 pm »
$350 minimum would be a good, cheap price, but expect to pay a little more (likely pushing $500)... especially if one has not been on ebay for awhile...

This is the only recent ebay sale that I can find and it’s in the UK

https://www.ebay.com/itm/274654954461?hash=item3ff2b603dd%3Ag%3AIJgAAOSwsxJgCXFK&nma=true&si=dkiZniuy6QAzRjS%252Fd2FjtAGoVls%253D&orig_cvip=true&nordt=true&rt=nc&_trksid=p2047675.l2557

Someone got a bargain there.

It was a good price, but I’m not really a fan of that generation... dark wood base, very turquoise? engine base, and fat red handles... I only like the dark base on the 95’s
Nick

  • Administrator
  • Engineer
  • *****
  • Posts: 6287
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Price range for a good used Jensen #20?
« Reply #6 on: April 21, 2021, 08:18:40 pm »
$350 minimum would be a good, cheap price, but expect to pay a little more (likely pushing $500)... especially if one has not been on ebay for awhile...

This is the only recent ebay sale that I can find and it’s in the UK

https://www.ebay.com/itm/274654954461?hash=item3ff2b603dd%3Ag%3AIJgAAOSwsxJgCXFK&nma=true&si=dkiZniuy6QAzRjS%252Fd2FjtAGoVls%253D&orig_cvip=true&nordt=true&rt=nc&_trksid=p2047675.l2557

Someone got a bargain there.

It was a good price, but I’m not really a fan of that generation... dark wood base, very turquoise? engine base, and fat red handles... I only like the dark base on the 95’s

I made a lot of new red handles, those fat ones just look real extra 'toyish' to me.
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos


  • Sr. Member
  • ****
  • Posts: 1818
  • Location: The Winter Wonderland, Michigan.
Re: Price range for a good used Jensen #20?
« Reply #7 on: April 21, 2021, 08:55:37 pm »
It was still $500 with shipping.
Tommy

"Steam it, like you mean it."

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2529
  • Location: Jutland
    • www.SteamUp.dk
Re: Price range for a good used Jensen #20?
« Reply #8 on: April 22, 2021, 05:20:57 am »
$350 minimum would be a good, cheap price, but expect to pay a little more (likely pushing $500)... especially if one has not been on ebay for awhile...

This is the only recent ebay sale that I can find and it’s in the UK

https://www.ebay.com/itm/274654954461?hash=item3ff2b603dd%3Ag%3AIJgAAOSwsxJgCXFK&nma=true&si=dkiZniuy6QAzRjS%252Fd2FjtAGoVls%253D&orig_cvip=true&nordt=true&rt=nc&_trksid=p2047675.l2557

Someone got a bargain there.
Now you struck a nerve here Jim ;)

No they didn´t!

I bought it, and that (stupid) seller kept insisting on shipping via his preferred shipper, as he appearently had a great deal with them.
I was charged £100 initially in shipping, and consistently from the very beginning asked him to use Royal Mail, as their £67 postage easily was covered by my payment, but he wouldn´t.
 Eventually after a couple of months, it had come back to him so many times, that he cancelled the sale with Ebay and refunded my money, claiming that my address wasn´t correct, eventhough i had received several packages via Ebay from the UK in the meantime.
(An address which i have had on record with Ebay and PayPal since 2004)

Regarding the engine itself, and my particular interest in it...
That engine was purchased new by an Australian "Whistler" in 2009, and was purchased by me in a "ridden hard, put away wet" state in 2012.
A year later a young kid at the Mamodboard was inquiring for a 20, and since he was such a young lad, it got the best of me and i sold it off to him at a VERY fair price, with the only condition that i should have the chance to buy it back, would he ever decide to part with it again.
Since it was so rusty all over, i changed firebox/chimney support and chimney to factorynew stripped parts (stripping was offered and chosen above factory paint), and beadblasted/repainted the rusty enginebase with hammerite, which is why the colour is slightly off there, and shipped it off.
When he grew a bit older he apperently had learned what he had, and kept listing it at Ebay at a high price where it didn´t sell, and had absolutely no intention of honouring our previous agreement, with no replies to my messages.
Then earlier this year it was listed again, an unwanted Christmas present according to the seller, and i decided to bring it home again...which as seen once again failed miserably.

So as you see by my rambling here, this particular engine has grown to be kind of a White Whale to me ::)

But yes, had i gotten it, the price would have been extremely good, on an imported engine like this over here.
In fact very close to what the youngster initially paid me...and spot on if the £100 postage was included into our totals.
Cheers
Jan
WEBSITE: SteamUp YOUTUBE: SteamUp

  • Administrator
  • Engineer
  • *****
  • Posts: 6287
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Price range for a good used Jensen #20?
« Reply #9 on: April 22, 2021, 05:59:04 pm »
Interesting read Jan, what a shame mate it didn't make it back to you.
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos


  • Full Member
  • ***
  • Posts: 740
  • Location: Lennestadt, Siuerland, Germany
Re: Price range for a good used Jensen #20?
« Reply #10 on: April 23, 2021, 05:24:48 am »
Hello Jan,
in Germany we have a saying:
"You always look people in the face".
Cheers
Jürgen
Dealing with steam is one way of having fun in life.

  • Administrator
  • Engineer
  • *****
  • Posts: 9193
  • Location: Minnesota, USA 🇺🇸
Re: Price range for a good used Jensen #20?
« Reply #11 on: April 23, 2021, 07:27:36 pm »
$350 minimum would be a good, cheap price, but expect to pay a little more (likely pushing $500)... especially if one has not been on ebay for awhile...

This is the only recent ebay sale that I can find and it’s in the UK

https://www.ebay.com/itm/274654954461?hash=item3ff2b603dd%3Ag%3AIJgAAOSwsxJgCXFK&nma=true&si=dkiZniuy6QAzRjS%252Fd2FjtAGoVls%253D&orig_cvip=true&nordt=true&rt=nc&_trksid=p2047675.l2557

Someone got a bargain there.
Now you struck a nerve here Jim ;)

No they didn´t!

I bought it, and that (stupid) seller kept insisting on shipping via his preferred shipper, as he appearently had a great deal with them.
I was charged £100 initially in shipping, and consistently from the very beginning asked him to use Royal Mail, as their £67 postage easily was covered by my payment, but he wouldn´t.
 Eventually after a couple of months, it had come back to him so many times, that he cancelled the sale with Ebay and refunded my money, claiming that my address wasn´t correct, eventhough i had received several packages via Ebay from the UK in the meantime.
(An address which i have had on record with Ebay and PayPal since 2004)

Regarding the engine itself, and my particular interest in it...
That engine was purchased new by an Australian "Whistler" in 2009, and was purchased by me in a "ridden hard, put away wet" state in 2012.
A year later a young kid at the Mamodboard was inquiring for a 20, and since he was such a young lad, it got the best of me and i sold it off to him at a VERY fair price, with the only condition that i should have the chance to buy it back, would he ever decide to part with it again.
Since it was so rusty all over, i changed firebox/chimney support and chimney to factorynew stripped parts (stripping was offered and chosen above factory paint), and beadblasted/repainted the rusty enginebase with hammerite, which is why the colour is slightly off there, and shipped it off.
When he grew a bit older he apperently had learned what he had, and kept listing it at Ebay at a high price where it didn´t sell, and had absolutely no intention of honouring our previous agreement, with no replies to my messages.
Then earlier this year it was listed again, an unwanted Christmas present according to the seller, and i decided to bring it home again...which as seen once again failed miserably.

So as you see by my rambling here, this particular engine has grown to be kind of a White Whale to me ::)

But yes, had i gotten it, the price would have been extremely good, on an imported engine like this over here.
In fact very close to what the youngster initially paid me...and spot on if the £100 postage was included into our totals.


Sorry for the paint comment Jan! 😬 Just too bright for my liking... I do like Rustoleum’s hammered blue (not sure on exact color) for a match.

As for seller, that’s Alex Gaspa aka Alex-G (AG Chiptuning) and his girlfriend Sian Grant. Been caught for bidding his own stuff up (including an SE4) and if he accidentally wins, he re-lists with high BINS.
Nick

  • Administrator
  • Engineer
  • *****
  • Posts: 6287
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Price range for a good used Jensen #20?
« Reply #12 on: April 23, 2021, 07:55:00 pm »
What a shame to read that young Alex (well he's not that young anymore) is shady.
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos


  • Global Moderator
  • Engineer
  • *****
  • Posts: 5596
  • Location: St. Paul Indiana
Re: Price range for a good used Jensen #20?
« Reply #13 on: April 23, 2021, 08:31:17 pm »
What a shame to read that young Alex (well he's not that young anymore) is shady.
I remember him
Bruce, St. Paul Indiana, USA
"Originality thrives in seclusion free of outside influences beating upon us to cripple the creative mind."
  Nikola Tesla

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2529
  • Location: Jutland
    • www.SteamUp.dk
Re: Price range for a good used Jensen #20?
« Reply #14 on: April 24, 2021, 04:44:35 am »
Please remember that i didn´t call him out as shady, and actually didn´t recall the Ebay scam either, before Nick mentioned it.
In my case, he merely grew up to be a man with a different set of values than i.
Had i held any real grudges, i would have named and shamed him, but don´t like to hang people out on smaller "lessons of life" like this.
Same reason the seller is unnamed as well, as i generally think he´s a good guy...just my bad luck that i encountered him while his brain was in for service.
Cheers
Jan
WEBSITE: SteamUp YOUTUBE: SteamUp