Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

so I made a crude drawing:

All parts in drawing are kit "stock" with the exception of the music maker will have its gearbox removed. AND there will be a new little line shaft mounted to the top of base.
  I have try to identify the new parts by drawing //// marks thru them.
  It would consist of a largish pulley that hangs off the side to get some gear reduction, this is the one that goes to the engine to get a nice horizontal belt drive.
  The middle small pulley goes straight up to the stock Ferris wheel axle just as the kit intends.
  The 3rd pulley goes straight down to drive the music.
 
The 2 things between the large pulley and 2 small pulleys are the small bearing towers of line shaft.
  These are my First thoughts, there may be Many ways to skin this cat.

Sorry about the crude drawing!


[ Guests cannot view attachments ]