Office of Steam Logo_1

Author Topic: Designing and maybe making a portable model railway.  (Read 1825 times)

Tony Bird

  • Full Member
  • ***
  • Posts: 582
  • Tony Bird
  • Location: Cardiff, South Wales, UK
Hi,

Forgot to show how the layout’s corners are reinforced using a glued peg. After the holes for the bolts are drilled a modified ‘G’ clamp is used to push the aluminium tubes in; the thrust washers are glued in place.  The hinges are fitted while the boards are held together and lined up with a bolt.

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

Regards Tony.