Gents - Need your help - Jensen #20

• #15 Reply
  Posted by Jim on 16 Aug, 2025 21:09
• Not sure what I've done, but see those two brass collection 'tanks' that I made, the #20 used to leak like a sieve and I'd empty them often.
  Been running it all morning and not a drop of water in either of them since I put it back together after removing that burr.
  
  [ Guests cannot view attachments ]
• 
  
• #16 Reply
  Posted by Jim on 16 Aug, 2025 21:13
• Has anyone ever devised a collection tube or similar for where the water comes out here? -
  
  
  [ Guests cannot view attachments ]
• 
  
• #17 Reply
  Posted by St Paul Steam on 17 Aug, 2025 08:44
• Seems you might have sealed it up better when you put it back together, but the condensate usually comes from the gland (well this doesn't really have an adjustable gland) but you did sump'tin right. I've never tried to channel the drips from the rear of the valve, usually not alot comes from it, although...I've seen Jensen cap that end before.
• 
  
• #18 Reply
  Posted by RedRyder on 17 Aug, 2025 13:13
• Very well done, Jim!
  
  I'm glad you got it sorted.
  
  Gil
• 
  
• #19 Reply
  Posted by Jim on 17 Aug, 2025 17:04
• Thanks Bruce & Gil.
• 
  
• #20 Reply
  Posted by txlabman on 27 Aug, 2025 12:13
• 
  Great outcome Jim.
  
  I admire your creativity solving the problem.
• 
  
• #21 Reply
  Posted by RedRyder on 28 Aug, 2025 07:57
• Quote from: Jim on 16 Aug, 2025 20:07

  Quote from: St Paul Steam on 16 Aug, 2025 19:06

  I own these, although I don't use the high powered lens much, these are one of the most used tools in my shop.I always know where they're at.
  https://www.amazon.com/your-orders/pop?ref=ppx_yo2ov_mob_b_pop&orderId=114-7617623-5997027&lineItemId=mprlnqhtqmqpony&shipmentId=UsyjPLQvS&packageId=1&asin=B007CDJKM2
  

  
  That link wouldn't load for me Bruce.
  
  I'd like the gear that my skin specialist has! He's let me play with it a bit.
  

  Yes, Jim is correct. That link takes me to my Amazon orders summary and no product.
• 
  
• #22 Reply
  Posted by Jim on 28 Aug, 2025 16:45
• Quote from: txlabman on 27 Aug, 2025 12:13

  
  Great outcome Jim.
  
  I admire your creativity solving the problem.
  

  
  Thanks Charlie
•