My goodness there are a lot of beautiful models on that site really goes to show there are some really talented people about, myself i`m not on the same planet. The problem i faced was cutting through the bend at an angle if you can follow makes it narrower at the rear than the front a real tinsmith would have no problem but for me i did say tricky.
[ Guests cannot view attachments ]
You can see there is a continuous lug but not much help, going to have to move the servos back 1/4" so i think a bit of a strip is in order if at first---. do have things in mind so all is not lost.
Home
Search
Today's Posts
Login
Register