Office of Steam Logo_1

« previous next »
Pages: [1]

Author Topic: Need some gas help  (Read 985 times)

  • Administrator
  • Engineer
  • *****
  • Posts: 6272
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Need some gas help
« on: June 30, 2024, 11:03:47 pm »
Need some gas help from the brains trust.

Below pic is-

Top is DIY second one is a BIX, a size 16 gas jet works perfectly in the BIX gas line to light the largest ceramic BIX burner with perfect shaped 'blue devils'.
The DIY one with the very same size 16 gas jet installed floods way too much gas.

For the life of me, I can't figure out any difference between the BIX copper and brass fitting to the DIY one I constructed.....anyone got any ideas?
I have swapped them over and over and over testing and its always the same.



[ Guests cannot view attachments ]
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4122
  • Location: Plano, Texas
Re: Need some gas help
« Reply #1 on: July 01, 2024, 08:53:47 am »

Sorry mate.

Not my area of expertise.

I am surprised that you didn't get any other replies.

Kinda discouraging to be frank.
Logged

  • Global Moderator
  • Engineer
  • *****
  • Posts: 5152
  • Wherever you go ......... there you are!
  • Location: Eastern Sierra
Re: Need some gas help
« Reply #2 on: July 01, 2024, 09:06:01 am »
Well, to be frank, I would need to have it all in hand and actually "see" what it is doing, before I'd want to hazard a guess as to just what is actually up in a situation like this. Gas is funny stuff, and trying to outguess issues remotely is mostly a futile gesture.
Logged
"Information is not knowledge, Knowledge is not wisdom, Wisdom is not truth, Truth is not beauty, Beauty is not love, Love is not music: Music is THE BEST...   
Wisdom is the domain of the Wis (which is extinct). Beauty is a French phonetic corruption of a short cloth neck ornament currently in resurgence..."
F. Zappa ... by way of Mary, the girl from the bus.

  • Administrator
  • Engineer
  • *****
  • Posts: 6272
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Need some gas help
« Reply #3 on: July 01, 2024, 05:37:46 pm »
Dennis has given me some good ideas to try and I have been able to get the below pdf book, I'll read that later and see if it mentions anything -

[ Guests cannot view attachments ]
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

Pages: [1]
« previous next »