Office of Steam Logo_1

« previous next »
Pages: [1] 2

Author Topic: New Line shaft workshop  (Read 5586 times)

  • Jr. Member
  • **
  • Posts: 284
New Line shaft workshop
« on: May 09, 2020, 07:53:05 pm »
Hi Guys,
I thought I would share one of my current projects.
A few more large pulleys to fit and some new paint on the old Jensen tools but it's getting there.

[ Guests cannot view attachments ]
[ Guests cannot view attachments ]


Logged

  • Global Moderator
  • Engineer
  • *****
  • Posts: 5596
  • Location: St. Paul Indiana
Re: New Line shaft workshop
« Reply #1 on: May 09, 2020, 08:53:46 pm »
Ahh....nice work , the Jensen #200 workshop (you beat me to the finish...lol )  :)
Logged
Bruce, St. Paul Indiana, USA
"Originality thrives in seclusion free of outside influences beating upon us to cripple the creative mind."
  Nikola Tesla

  • Full Member
  • ***
  • Posts: 356
Re: New Line shaft workshop
« Reply #2 on: May 09, 2020, 09:13:03 pm »
I like the look of the lineshaft. Ellegant and functional at the same time. Very nice.
Logged
ALWAYS WORKING TO FIND A CURE FOR CENOSILLICAPHOBIA
Cheers. Dave.

  • Administrator
  • Engineer
  • *****
  • Posts: 9193
  • Location: Minnesota, USA 🇺🇸
Re: New Line shaft workshop
« Reply #3 on: May 09, 2020, 11:00:37 pm »
Nicely done Bill! 
Logged
Nick

  • Global Moderator
  • Engineer
  • *****
  • Posts: 5596
  • Location: St. Paul Indiana
Re: New Line shaft workshop
« Reply #4 on: May 10, 2020, 06:37:20 am »
I see you also have the drill press functioning off the bottom stud (as designed) I am currently getting ready to do that myself....I would love to know how you proceeded with that. your stanchions are lovely & very elegant. I noticed you also put a grinding wheel on one of the table saws...I have yet to be able to get the saw blade off of the table saw , would be interested in how you did that as well, Very well done Bill & an outstanding job thus far, cant wait to see everything painted up slick & the finished Jensen #200
Logged
Bruce, St. Paul Indiana, USA
"Originality thrives in seclusion free of outside influences beating upon us to cripple the creative mind."
  Nikola Tesla

  • Jr. Member
  • **
  • Posts: 58
  • Location: Missouri, USA
Re: New Line shaft workshop
« Reply #5 on: May 10, 2020, 07:45:38 am »
That is a great workshop!
Logged

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2529
  • Location: Jutland
    • www.SteamUp.dk
Re: New Line shaft workshop
« Reply #6 on: May 10, 2020, 08:32:59 am »
Great job Bill !!!

...and a very wise move, to ad a third post to the center of the lineshaft
Logged
Cheers
Jan
WEBSITE: SteamUp YOUTUBE: SteamUp

  • Sr. Member
  • ****
  • Posts: 1077
  • Location: Gahanna, Ohio
Re: New Line shaft workshop
« Reply #7 on: May 10, 2020, 09:02:01 am »
That's a nice setup, Bill - turned out great!
Logged
Regards,
Larry

  • Jr. Member
  • **
  • Posts: 284
Re: New Line shaft workshop
« Reply #8 on: May 10, 2020, 03:39:44 pm »
Thank you all for the kind comments.
With all that is going on these days I find myself taking sanctuary in my workshop more often. :)
Logged

  • Jr. Member
  • **
  • Posts: 284
Re: New Line shaft workshop
« Reply #9 on: May 10, 2020, 04:07:34 pm »
Quote from: St Paul Steam on May 10, 2020, 06:37:20 am
I see you also have the drill press functioning off the bottom stud (as designed) I am currently getting ready to do that myself....I would love to know how you proceeded with that. your stanchions are lovely & very elegant. I noticed you also put a grinding wheel on one of the table saws...I have yet to be able to get the saw blade off of the table saw , would be interested in how you did that as well, Very well done Bill & an outstanding job thus far, cant wait to see everything painted up slick & the finished Jensen #200

Bruce this is how I modified the Drill press, I feel a little bad about modifying it as there is not an unlimited supply.

I cut this shaft off leaving just a nub, then filed it flat.
[ Guests cannot view attachments ]

Next I found a piece of Brass tubing that was a nice fit over the nub, and  transfer punch that fit the tubing.
[ Guests cannot view attachments ]

Whapped it with the hammer.
[ Guests cannot view attachments ]

and proceeded to drill and tap it.
[ Guests cannot view attachments ]

I turned a double pulley, drilled and bored it to accommodate a shoulder screw.
[ Guests cannot view attachments ]


 


Logged

  • Global Moderator
  • Engineer
  • *****
  • Posts: 5159
  • Wherever you go ......... there you are!
  • Location: Eastern Sierra
Re: New Line shaft workshop
« Reply #10 on: May 10, 2020, 04:11:38 pm »
I really like the narrow/longer format that you've created here. Looks far more "authentic" and would tuck into a workshop building far better than the Jensen original.
Logged
"Information is not knowledge, Knowledge is not wisdom, Wisdom is not truth, Truth is not beauty, Beauty is not love, Love is not music: Music is THE BEST...   
Wisdom is the domain of the Wis (which is extinct). Beauty is a French phonetic corruption of a short cloth neck ornament currently in resurgence..."
F. Zappa ... by way of Mary, the girl from the bus.

  • Jr. Member
  • **
  • Posts: 284
Re: New Line shaft workshop
« Reply #11 on: May 10, 2020, 04:15:54 pm »
Here is the pulley and screw.
[ Guests cannot view attachments ]

As far as removing the blade from the saw goes, I struggled with that for a while.
I was afraid of breaking the saw if I pried too much, it can be done but my advice is to cut the shaft here, between the pillow block and the brass spacer, the shaft does not go into the other pillow block so the blade and short bit of shaft will drop out and you can remove the the longer section of shaft from the left

[ Guests cannot view attachments ]
The shaft is easily replaced with a new length of 1/8" rod or piano wire.
Logged

  • Jr. Member
  • **
  • Posts: 284
Re: New Line shaft workshop
« Reply #12 on: May 10, 2020, 04:20:39 pm »
Quote from: Stoker on May 10, 2020, 04:11:38 pm
I really like the narrow/longer format that you've created here. Looks far more "authentic" and would tuck into a workshop building far better than the Jensen original.

Thanks Daniel, I can't take any credit for the layout though.
Logged

  • Global Moderator
  • Engineer
  • *****
  • Posts: 5596
  • Location: St. Paul Indiana
Re: New Line shaft workshop
« Reply #13 on: May 10, 2020, 05:20:08 pm »
Thanks Bill, this was "Exactly" what I was looking for …..much appreciated  :)
Logged
Bruce, St. Paul Indiana, USA
"Originality thrives in seclusion free of outside influences beating upon us to cripple the creative mind."
  Nikola Tesla

  • Jr. Member
  • **
  • Posts: 173
  • Location: Northwest, Indiana
Re: New Line shaft workshop
« Reply #14 on: May 10, 2020, 05:32:27 pm »
Looks good Bill, time well spent.
Logged
John
Pages: [1] 2
« previous next »