Office of Steam Logo_1

« previous next »
Pages: [1]

Author Topic: Maudslay Marine Oscillating engine  (Read 1135 times)

  • Jr. Member
  • **
  • Posts: 113
Re: Maudslay Marine Oscillating engine
« on: March 08, 2019, 04:24:08 pm »
Hi Frazer,
To cut the 45 degree chamfer on the flywheel I have a variety of end mill ground with 30, 45 and 60 degree angles. I cut the sides of the spokes first then matched the radius with the chamfer in the corners.
Logged
Talent unshared is talent wasted.
Pages: [1]
« previous next »