My engine (kit) came today, everything that is needed (Except screws) is supplied.
I will need:
4 wood screws to mount engine
2 wood screws to mount battery box
1 metric machine screw to mount fuel tank.
Solder supplies to wire on/off switch.
All the screw holes are pre drilled, if I left the on/off switch out, I believe I could try to start it in under 20 minutes. I will use the on/off switch and have an idea for a simple oil drip pan as the engine cast base has a slot, and the oil drip pan may help keep stray oil from contaminate the electronic's in the wood base. I will post more after I get it assembled and running, it seems to have more compression than the M90
[ Guests cannot view attachments ]
Home
Search
Today's Posts
Login
Register