Stuart Models & Tiny Power

• Stuart Models & Tiny Power
  Posted by don6698@comcast.net on 17 Aug, 2025 09:11
• What is the difference between a Stuart Models 10V and a Tiny Power 1-10V. ?  Thanks
  
• 
  
• #1 Reply
  Posted by Stoker on 17 Aug, 2025 10:32
• There are a number of minor differences, but at the end of the day they are both similarly sized single vertical cylinder steam engines.
  
  They both are listed as having .75" bores, but the TP has a slightly longer stroke by .125" at .875".
  
  The Stuart has a full crank with two cheeks, while the TP has a cut away crank disk or open crank with only one cheek.
  
  The Stuart has a larger flywheel and the ability to mount pulleys or etc, at both ends of the crankshaft, while with an open crank the TP can only mount at one end.
  
  There are needful differences to the base mounts and bearing blocks as well.
• 
  
• #2 Reply
  Posted by don6698@comcast.net on 17 Aug, 2025 11:15
• Thank you.
• 
  
• #3 Reply
  Posted by SteamerJ on 17 Aug, 2025 14:41
• Are you eyeing the one on eBay?
• 
  
• #4 Reply
  Posted by Jim on 17 Aug, 2025 18:14
• Quote from: SteamerJ on 17 Aug, 2025 14:41

  Are you eyeing the one on eBay?
  

  
  With the conversion rate, this is a lot nicer looking engine -
  
  https://miniaturesteammodels.com/products/copy-of-5006s-pevensey-single-cylinder-horizontal-steam-engine-non-reversing
•