Office of Steam Logo_1

Author Topic: Bing 130/451  (Read 203 times)

txlabman

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3592
  • Location: Plano, Texas
Bing 130/451
« on: April 16, 2019, 05:31:48 pm »
This was an eBay purchase in 2017.  I paid $70 for this engine.  Burner was included.  I don't think the chimney is original, but I like the proportion.

I recently gave it a cleaning and oiling and replaced the burner wick.  Otherwise, it is as I received it.

This model has a reversing lever which allows it to run in both directions.  It self-started when tested on 5 psi of air and would self-start when I pulled the reversing lever while running on steam.  But, as you will see in the video, that was not the case when running it on steam.

The boiler filled at 110 cc's and I removed 30% of the water (so ran it on about 80 cc's).  I ran it for about 15 minutes and still had ~20cc remaining in the boiler.

The video was filmed with my DJI Osmo Pocket and the video includes a picture of my garage video studio right before the shoot.  I edit all my videos with MovieMaker on my iPad.  Limited functionality, but the editor is reliable and doesn't freeze up.



I hope you enjoy the video.



CBWho

  • Full Member
  • ***
  • Posts: 562
  • Location: Minnesota
Re: Bing 130/451
« Reply #1 on: April 16, 2019, 09:26:19 pm »
I didn't know that some Bings had a reverse lever.
Needs a load. Any Bing accessories to run?

I like the stamped boiler, very ornate. :)

Nick

  • Administrator
  • Engineer
  • *****
  • Posts: 8116
  • Location: Minnesota, USA
Re: Bing 130/451
« Reply #2 on: April 17, 2019, 11:32:58 am »
Nice runner Charlie, your video quality is getting very good! I think I remember watching this one on ebay in 2017!

Chris, looks like you need to get on ebay and find yourself a reversing Bing  ;)  ;)
Nick

txlabman

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3592
  • Location: Plano, Texas
Re: Bing 130/451
« Reply #3 on: April 17, 2019, 12:05:08 pm »
I actually have two of them.  The other one also has a lithographed base.  It is quite a bit smaller and is missing the steam line.  For now, I am just running it on air with some tubing.  Pictures to follow in a separate post.

Jim

  • Administrator
  • Hero Member
  • *****
  • Posts: 4330
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Bing 130/451
« Reply #4 on: April 17, 2019, 09:28:52 pm »
Nice runner Charlie and that DJI is working out well for you.
_______________________________________________
Cheers.
Jim

My YouTube Channel https://www.youtube.com/user/Blue123Heeler/videos


Dr.Rev.DelmarMacReady

  • Full Member
  • ***
  • Posts: 603
  • Location: Birmingham, AL U.S.A
Re: Bing 130/451
« Reply #5 on: April 18, 2019, 12:30:31 am »
Runs well, Charlie. I like those faux riveted fireboxes. An overtype of this vintage just sold on the bay.
Your new camera rig is tops. Thanks for the video!
Bennydaheeb

RedRyder

  • Administrator
  • Hero Member
  • *****
  • Posts: 4310
  • Location: Connecticut - USA
Re: Bing 130/451
« Reply #6 on: April 18, 2019, 05:56:09 am »
Hi Charlie, it must have felt great to fire it up after it sitting since 2017.
It runs great and you did a great job on the video!


Gil

txlabman

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3592
  • Location: Plano, Texas
Re: Bing 130/451
« Reply #7 on: April 20, 2019, 03:24:06 pm »
Runs well, Charlie. I like those faux riveted fireboxes. An overtype of this vintage just sold on the bay.
Your new camera rig is tops. Thanks for the video!

Thanks Benny. I really like the reversing mechanism and the lithograph bases keep sucking 💰 out of  my wallet. 🤠

txlabman

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3592
  • Location: Plano, Texas
Re: Bing 130/451
« Reply #8 on: April 20, 2019, 03:26:08 pm »
Thanks Benny. I really like the reversing mechanism and the lithograph bases keep sucking 💰 out of  my wallet. 🤠

Thank you Gil.

Looking forward to seeing you and Simone at NAMES.

I hope with everything going on you will still make it.

RedRyder

  • Administrator
  • Hero Member
  • *****
  • Posts: 4310
  • Location: Connecticut - USA
Re: Bing 130/451
« Reply #9 on: May 02, 2019, 08:53:29 pm »
Hi Charlie, It was great seeing you at NAMES!